Showing posts with label 9. Show all posts
Showing posts with label 9. Show all posts

Tuesday, October 28, 2014

9 to 5 Volt DC Converter

9
9 to -5 Volt DC Converter
By using IC NE555, which causes wave clear the sector output allows the voltage nearly 6V after the signify on the output from a pulse plus C2 acts charge through D1 to ground and if the pulse harmful capacitor C2 desire discharge. through diode D1 and capacitor C3 to chage so as to negative voltage is about-6V, but being aloof to the run to of absent-5V zener diode ZD1 current output will happen approximately 12mA. To test the circuit or else circuits with the purpose of may well need various circuits, but we take refusal fire-5V power supply-5V, but if the battery 9V circuit can allow us to avail yourself of the volt-5V being desired. 

ReadMore..

Friday, August 22, 2014

Stereo 9 Volt power amplifier circuit

Here I will explain about the necessary voltage and power amplifier output. The voltage should have at least approximately 9Volt 30Volt voltage and maximum voltage on the DC current. For maximum output of 2 X 2Watt with impedance 8-16 ohm. Because this amplifier circuit using ic and ic is used have the equation, so that if used different ic, then the required output voltage and also differ depending ic respectively.

Part List :
Resistor
R1 = 1M
R2 = 1M
R3 = 1K
R4 = 1K
R5 = 100K
R6 = 100K
R7 = 1R
R8 = 1R
Capacitor
C1 = 1uF
C2 = 220uF
C3 = 1uF
C4 = 100uF
C5 = 5uF
C6 = 5uF
C7 = 0.1uF
C8 = 220uF
C9 = 220uF
C10 = 0.1uF
IC
U1 = ULN2274B , ULN2277 , ULN2278B
ReadMore..